-
Kinematic Viscosity Bath has CE certificate
Our model K622 Kinematic Viscosity Bath has CE certificate. K622 is highly cost effective. Conforms to ASTM D445. Measuring temperature is up to 150 degree. Temperature control accuracy is 0.1 degree. K622 is most popular model in kinematic viscosity bath series.
-
Kinematic Viscosity Bath is with CE marking
Our model K624 Kinematic Viscosity Bath is with CE marking. Conforms to ASTM D445. The measuring temperature is up to 100 degree. Generally, it has 4 testing holes. 2 testing holes or other quantity's hole is available as per requirements.
-
Total Acid Number Analyzer had CE
Our model K632 Total Acid Number Analyzer had CE certificate. It complies with ASTM D974 to measure the acid number or acidity of lubricating oil, transformer oil and other petroleum products. It can measure up to 6 samples at the same time.
-
Total Base Number Titrator obtained CE
Our model K633 Total Base Number Titrator obtained CE certification recently. Its operation is a little complicated. Generally, an experienced technician who understands ASTM D2896 and related test methods can operate this titrator. It needs to use some solvents.
-
MG-III Power Factor Test Set CE certified
Our model MG-III Power Factor Test Set have got the CE certification. MG-III is used to measure the dielectric dissipation factor (Tan Delta), capacitance, insulation resistance, relative permittivity and volume resistivity of transformer oil.In order to explore Europe market, our company applied for ...
-
K652 Foaming Characteristics Tester passed CE
Our model K652 Foaming Characteristics Tester passed CE and can be with CE marking.K652 comforms to ASTM D892. It is used for measuring the foam characteristics of petroleum products. The test result can be shown by LCD or digit display according to customer's choice.
-
K653 Karl Fischer Titrator obtained CE
K653 Coulometric Karl Fischer Titrator is one of our main products. It applies for measuring moisture content in oil, food, painting, cosmetic and pharmaceutical etc. The result is displayed in PPM. It has been exported to many countries. Recently, it passed CE certification and has CE marking.
-
K654A Water Content Tester earned CE
Our model K654A Water Content Tester passed CE certification and got CE certificate. K654A is used to measure the water content of petroleum products, including lubricating grease. It conforms to ASTM D95. Two oil samples can be measured at the same time.K654A is sold well in China as its considerable ...
-
Portugal order shipped
The automatic kinematic viscosity bath and grease cone penetration apparatus ordered by a laboratory in Portugal was delivered yesterday. The shipment will be transhipped in Hong Kong. It is estimated that the customer could receive the instruments in 7 - 10 days.
-
K676 Water Separability Tester obtained CE certificate
Our model K676 Water Separability Tester obtained CE certificate. Kailian Yongrun pays much attention to quality of the product and applies for CE certification for the products. To some extent, CE is a recognition of the quality of product.K676 Water separability Tester is designed and made to measure ...
