Home > Classroom

  • ASTM D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination ASTM D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)4. Summary of Test Method4.1 A known volume of chilled, air-saturated sample is introduced into an evacuated, thermostatically controlled test chamber of known volume or ...
  • ASTM D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination ASTM D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)1. Scope1.1 This test method covers the determination of the temperature at which the vapor formed from a selected volume of volatile petroleum product saturated with air ...
  • ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Lo ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions8. Report8.1 Report the results as follows:8.1.1 Oil separation, percent volume,8.1.2 Water separation, percent volume,8.1.3 Upper layer water content, percent weight, and8.1.4 Lower ...
  • ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Lo ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions7. Procedure7.1 After careful preparation of the sample to ensure homogeneity (described in Section 6), transfer 100 mL to a graduated 100-mL cylinder. Insert the vented stopper.7.2 ...
  • ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Lo ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions5. Apparatus5.1 Cold Box - A thermostatically controlled freezer or cold box capable of being maintained at -18 +/- 1.5°C (0 +/- 3°F).5.2 Graduated Cylinder - A stoppered 100-mL ...
  • ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Lo ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions3. Summary of Test Method3.1 A 100-mL sample contained in a graduated 100-mL cylinder is placed in a cooling box at -18°C (0°F) for 16 h and then allowed to stand at room temperature ...
  • ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Lo ASTM D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions1. Scope1.1 This test method is intended to indicate the stability of water-in-oil emulsions when subjected to temperature cycling changes between ambient temperature and -18°C ...
  • ASTM D6203 Standard Test Method for Thermal Stability of Way Lubricants ASTM D6203 Standard Test Method for Thermal Stability of Way Lubricants9. Report9.1 Report the following information:9.1.1 Color of the copper and steel rods using the numerical designations on the chart.9.1.2 Any etching.9.1.3 Whether any deposits were found on the rods or beaker.10. Precision and Bias10.1 ...
  • ASTM D6203 Standard Test Method for Thermal Stability of Way Lubricants ASTM D6203 Standard Test Method for Thermal Stability of Way Lubricants8. Test Procedure8.1 Place a representative 75 mL sample of test oil obtained in accordance with Practice D4057 sampling procedure in a clean 100 mL Griffin beaker containing one each of the cleaned and polished iron and copper rods.8.2 ...
  • ASTM D6203 Standard Test Method for Thermal Stability of Way Lubricants ASTM D6203 Standard Test Method for Thermal Stability of Way Lubricants5. Apparatus5.1 Gravity Convection Electric Oven, capable of maintaining the samples at a test temperature of 100 +/- 2°C.5.2 Calibrated Temperature Indicator, suitable for measuring and controlling the oven temperature.5.3 Griffin ...