Home > Classroom

  • ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their Components ASTM D6139 Aerobic Aquatic Biodegradation of Lubricants or Their ComponentsASTM D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask1. Scope1.1 This test method covers the determination of the degree of aerobic ...
  • ASTM D6158 Standard Specification for Mineral Hydraulic Oils ASTM D6158 Standard Specification for Mineral Hydraulic Oils5. Inspection5.1 Inspection of the material shall be agreed upon between the purchaser and the supplier.6. Packaging and Package Marking6.1 The material shall be suitably packaged to permit acceptance by the carrier and to afford adequate protection ...
  • ASTM D6158 Standard Specification for Mineral Hydraulic Oils ASTM D6158 Standard Specification for Mineral Hydraulic Oils3. Classification3.1 Type HH Hydraulic Oils - Non-inhibited refined mineral oils for hydraulic systems that do not have specific requirements of oxidation stability, rust protection, or anti-wear properties. Type HH oils are usually intended ...
  • ASTM D6158 Standard Specification for Mineral Hydraulic Oils ASTM D6158 Standard Specification for Mineral Hydraulic Oils1. Scope1.1 This specification covers mineral oils used in hydraulic systems, where the performance requirements demand fluids with one of the following characteristics:1.1.1 A refined base oil (Class HH),1.1.2 A refined mineral base oil with ...
  • ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)11. Report11.1 Report the following information:11.1.1 Grease identity,11.1.2 Test date,11.1.3 Test temperature and duration, and11.1.4 Oil separation, nearest 0.1 %.12. Precision and Bias12.1 Precision - Eight cooperators ...
  • ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)9. Procedure9.1 Preheat the oven to test temperature. Unless otherwise specified, the test shall be conducted at standard conditions of 100 +/- 0.5°C for 30 +/- 0.25 h.9.2 Weigh the beaker to within 0.01 g, Wi.9.3 ...
  • ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)6. Apparatus6.1 Test Apparatus - The assembled apparatus consists of a cone-shaped sieve constructed of 60-mesh, corrosion -resistant wire cloth, a 200-mL tall-form beaker without spout, and a closely fitting cover ...
  • ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)4. Summary of Test Method4.1 The weighed sample is placed in a cone-shaped, wire-cloth sieve, suspended in a beaker, then heated under static conditions for the specified time and temperature. Unless otherwise required ...
  • ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Coni ASTM D6184 Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)1. Scope1.1 This test method is used to determine the tendency of lubricating grease to separate oil at an elevated temperature. This test method shall be conducted at 100°C for 30 h unless other conditions are required ...
  • ASTM D6186 Test Method for Oxidation Induction Time of Lubricating Oils ASTM D6186 Test Method for Oxidation Induction Time of Lubricating OilsASTM D6186 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)9. Report9.1 Report, to the nearest minute, the oxidation induction time (OIT) for the sample.9.2 ...