-
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test8 Procedure8.1 GeneralThere are a variety of test conditions which are broadly specific to given classes of product, but within certain classes, more than one condition of time and/or temperature may apply. In general, aviation ...
-
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test6 Samples and sampling6.1 Unless otherwise specified, samples shall be taken according to the procedures described in ISO 3170 or ISO 3171.6.2 Samples that are required to be tested against a "low-tarnish" strip classification shall ...
-
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test4 Reagents and materials4.1 Wash solvent2,2,4-trimethylpentane (isooctane) of minimum 99.75 % purity is the referee solvent, but any volatile sulfur-free hydrocarbon solvent that shows no tarnish when tested by the procedure of ...
-
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip test
ISO 2160 Petroleum products - Corrosiveness to copper - Copper strip testWARNING - The use of this International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety problems associated with its use. It is the responsibility ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method11 Expression of resultsReport the induction period, obtained from 10.1 or 10.2, in hours and rounded to the nearest 0.1 h.If the induction ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method9 Measurement9.1 Set up the apparatus as shown in Figure 1. If commercially available equipment is used, follow the manufacturer's instructions.9.2 ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method7 SamplingUnless otherwise specified, sampling shall be conducted according to EN ISO 3170 or EN ISO 3171 and/or in accordance with the ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method5 Reagents and materialsUse only reagents of analytical grade and distilled or demineralised water.5.1 Ternary solvent mixture, consisting ...
-
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends wi
BS EN 15751 Automotive fuels - Fatty acid methyl ester (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method1 ScopeThis European Standard specifies a test method for the determination of the oxidation stability of fuels for diesel engines, by means ...
-
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determinatio
EN 14538 Fat and oil derivatives - Fatty acid methyl ester (FAME) - Determination of Ca, K, Mg and Na content by optical emission spectral analysis with inductively coupled plasma (ICP OES)11 Expression of resultsThe results for the sum of the contents of Calcium and Magnesium and for the sum of the ...
