-
ISO 3734 Petroleum products - Determination of water and sediment in residual fu
ISO 3734 Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method7 Procedure7.1 Fill each of two centrifuge tubes (5.2) to the 50 ml mark with toluene which has been water saturated at 50°C; then immediately pour the laboratory sample directly from the sample ...
-
ISO 3734 Petroleum products - Determination of water and sediment in residual fu
ISO 3734 Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge method4 Reagents and materials4.1 Toluene, conforming with the requirements for grade 1 toluene as specified in ISO 5272.The solvent shall be water-saturated at the test temperature, 50°C +/- 1°C or ...
-
ISO 3734 Petroleum products - Determination of water and sediment in residual fu
ISO 3734 Petroleum products - Determination of water and sediment in residual fuel oils - Centrifuge methodWARNING - The use of this International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address any of the safety problems associated ...
-
ISO 3733 Petroleum products and bituminous materials - Determination of water -
ISO 3733 Petroleum products and bituminous materials - Determination of water - Distillation method10 Expressions of resultsReport the result as the water content to the nearest 0.05 % if the 2 ml trap has been used, and to the nearest 0.1 % if the 10 ml or 25 ml traps have been used with a 100 ml or ...
-
ISO 3733 Petroleum products and bituminous materials - Determination of water -
ISO 3733 Petroleum products and bituminous materials - Determination of water - Distillation method8 Procedure8.1 Homogenize the sample in accordance with 7.3 before taking the test portion.8.2 Measure the required test portion to an accuracy of +/- 1 % and transfer it to the still in accordance with ...
-
ISO 3733 Petroleum products and bituminous materials - Determination of water -
ISO 3733 Petroleum products and bituminous materials - Determination of water - Distillation method6 Verification and recovery test6.1 GeneralBefore initial use, verify the accuracy of the trap in accordance with 6.2. Before using the apparatus, carry out a recovery test in accordance with 6.3.6.2 VerificationBefore ...
-
ISO 3733 Petroleum products and bituminous materials - Determination of water -
ISO 3733 Petroleum products and bituminous materials - Determination of water - Distillation method4 ReagentsNOTE For the purposes of this International Standard, the expression "% (V/V)" is used to represent the volume fraction of a material.A solvent-carrier liquid appropriate to the materials being ...
-
ISO 3733 Petroleum products and bituminous materials - Determination of water -
ISO 3733 Petroleum products and bituminous materials - Determination of water - Distillation methodWARNING - The use of this International Standard may involve hazardous materials, operations and equipment. This International Standard does not purport to address all of the safety problems associated ...
-
ISO 3171 Petroleum liquids - Automatic pipeline sampling
ISO 3171 Petroleum liquids - Automatic pipeline sampling16 Estimation of overall sampling system uncertainty16.1 IntroductionThis clause provides a mathematical procedure for estimating the overall uncertainty of the sampling system, taking into account the uncertainty of each element of the sampling ...
-
ISO 3171 Petroleum liquids - Automatic pipeline sampling
ISO 3171 Petroleum liquids - Automatic pipeline sampling15 Proving the sampling system15.1 IntroductionA field test to prove the sampling system should be carried out after a new automatic sampler has been installed. The following procedure is intended to test the total sample system by injecting a volume ...
