-
COLOR PLATINUM-COBALT COLOR: D1209
COLOR PLATINUM-COBALT COLOR: D1209EXPLANATIONThis test method describes a procedure for the visual measurement of the color of essentially light colored liquids. It is applicable only to materials in which the color-producing bodies present have light absorption characteristics nearly identical with ...
-
COLOR GARDNER COLOR: D1544
COLOR GARDNER COLOR: D1544EXPLANATIONThis test method covers the measurement of the color of transparent liquids by means of comparison with arbitrarily numbered glass standards. It applies to drying oils, varnishes, fatty acids, polymerized fatty acids, and resin solutions.TEST SUMMARYA glass tube is ...
-
COLOR OF DYED AVIATION GASOLINE: D2392
COLOR OF DYED AVIATION GASOLINE: D2392EXPLANATIONAviation gasolines are dyed different colors for easy identification of grade, thus minimizing possibilities for fueling air-craft with fuel of the wrong grade. This test method is a pass-fail test for the acceptability of color of dyed aviation gasolines.TEST ...
-
COLOR ASTM COLOR: D1500
COLOR ASTM COLOR: D1500(Equivalent Test Methods: IP 196, ISO 2049, DIN 51578, JIS K 2580, and AFNOR T60-104)GENERALDetermination of the color of petroleum products is used mainly for manufacturing control purposes and is an important quality characteristic since color is readily observed by the user ...
-
COLD FILTER PLUGGING POINT (CFPP) OF DIESEL AND HEATING FUELS: D6371
COLD FILTER PLUGGING POINT (CFPP) OF DIESEL AND HEATING FUELS: D6371(Equivalent Test Methods: IP 309 and EN 116)EXPLANATIONThe CFPP of a fuel is suitable for estimating the lowest temperature at which a fuel will give trouble-free flow in certain fuel systems. For diesel fuels used in European light ...
-
COLD CRANKING SIMULATOR APPARENT VISCOSITY USING COLD CRANKING SIMULATOR: D2602
COLD CRANKING SIMULATOR APPARENT VISCOSITY USING COLD CRANKING SIMULATOR: D2602(Equivalent Test Methods: IP 350 and DIN 51377)EXPLANATIONThe apparent viscosity as determined in this test method has been established as predicting engine-cranking viscosities at -18° C. This test method covers the laboratory ...
-
COKING VALUE OF TAR AND PITCH: D4715
COKING VALUE OF TAR AND PITCH: D4715EXPLANATIONThis test method is used for indicating the relative coke-forming properties and for evaluating and characterizing tars and pitches. This is one of the elements in establishing uniformity of shipments of sources of supply. This test method is applicable ...
-
COEFFICIENT OF KINETIC FRICTION FOR WAX COATINGS: D2534
COEFFICIENT OF KINETIC FRICTION FOR WAX COATINGS: D2534EXPLANATIONThe coefficient of friction is related to the slip properties of many commercial articles which have been coated with petroleum wax (e.g., butter cartons and wax impregnated or hot melt coated corrugated board). This test method covers ...
-
FRICTION AND WEAR PROPERTIES OF LUBRICATING GREASE: D5707
FRICTION AND WEAR PROPERTIES OF LUBRICATING GREASE: D5707EXPLANATIONThis test method is used for determining wear properties and coefficient of friction of lubricating greases at selected temperatures and loads specified for use in applications where high-speed vibrational or start-stop motions are present ...
-
ASTM D3455 for compatibility of construction material with insulating oil
ASTM D3455 for compatibility of construction material with insulating oilASTM D3455 standard test methods for compatibility of construction material with electrical insulating oil of petroleum origin9. Report9.1 Report the following information:9.1.1 The results of the tests specified in 8.2.5, on both ...
