-
ASTM D1264 test method for water washout characteristics of lubricating greases
ASTM D1264 test method for water washout characteristics of lubricating greases3. Summary of Test Method3.1 The grease is packed into a ball bearing, the bearing is then inserted in a housing with specified clearances, and rotated at 600 more or less 30 rpm. Water, controlled at the specified test temperature, ...
-
ASTM D1264 test method for water washout characteristics of lubricating greases
ASTM D1264 test method for water washout characteristics of lubricating greases1. Scope1.1 This test method covers the evaluation of the resistance of a lubricating grease to washout by water from a bearing, when tested at 38 and 79°C (100 and 175°F) under the prescribed laboratory conditions. It is ...
-
ASTM D2509 test method for load-carrying capacity of lubricating grease
ASTM D2509 test method for load-carrying capacity of lubricating grease10. Calculation and Report10.1 Report the OK and score values in terms of the masses (weights) placed on the mass (weight) pan hanging from the end of the load-lever arm; do not include the mass (weight) of the pan assembly. Report ...
-
ASTM D2509 test method for load-carrying capacity of lubricating grease
ASTM D2509 test method for load-carrying capacity of lubricating grease9. Procedure9.1 Bring the grease to 24 more or less 6°C (75 more or less 10°F). Fill the grease-feeding device with grease, avoiding the inclusion of air bubbles. Apply a film of grease to the test cup and block and thoroughly grease ...
-
ASTM D2509 test method for load-carrying capacity of lubricating grease
ASTM D2509 test method for load-carrying capacity of lubricating grease6. Apparatus and Materials6.1 Timken Extreme Pressure Tester, described in detail in Annex A1 and illustrated in Fig. 2.6.2 Sample Feed Devices, for supplying the test specimens with grease are described in Annex A1.6.3 Loading Mechanism, ...
-
ASTM D2509 test method for load-carrying capacity of lubricating grease
ASTM D2509 test method for load-carrying capacity of lubricating grease4. Summary of Test Method4.1 The tester is operated with a steel test cup rotating against a steel test block. The rotating speed is 123.71 more or less 0.77 m/min (405.88 more or less 2.54 ft/min) which is equivalent to a spindle ...
-
ASTM D2509 test method for load-carrying capacity of lubricating grease
ASTM D2509 test method for load-carrying capacity of lubricating greaseASTM D2509 standard test method for measurement of load-carrying capacity of lubricating grease (Timken method)1. Scope1.1 This test method covers the determination of the load-carrying capacity of lubricating greases by means of ...
-
ASTM D942 test method for oxidation stability of lubricating greases
ASTM D942 test method for oxidation stability of lubricating greasesASTM D942 standard test method for oxidation stability of lubricating greases by the oxygen pressure vessel method9. Report9.1 Report the average of duplicate determinations as pressure drop in pounds per square inch, or kilopascals ...
-
ASTM D942 test method for oxidation stability of lubricating greases
ASTM D942 test method for oxidation stability of lubricating greasesASTM D942 standard test method for oxidation stability of lubricating greases by the oxygen pressure vessel method8. Procedure8.1 Fill each of the five dishes with 4.00 more or less 0.01 g of grease. Distribute the samples in the dishes ...
-
ASTM D942 test method for oxidation stability of lubricating greases
ASTM D942 test method for oxidation stability of lubricating greasesASTM D942 standard test method for oxidation stability of lubricating greases by the oxygen pressure vessel method5. Apparatus5.1 Oxidation Pressure Vessel, Sample Dish, Dish Holder, Pressure Gage and Oil Bath as described in detail ...
