-
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and P
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)1. Scope1.1 This test method covers a procedure for quantifying the maximum flocculation ratio of the asphaltenes in the oil and the peptizing power ...
-
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids12. Report12.1 Report the results in a manner conforming with the specifications of the material tested. If no definite manner of reporting is specified, report the corrected temperatures at each observed volume, and report the ...
-
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids10. Factors Causing Superheating10.1 In general, any condition whereby the temperature surrounding the vapor exceeds the temperature of the vapor in equilibrium with the liquid will cause superheating. Specific factors conducive ...
-
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids9. Procedure9.1 Manual Distillation Procedure:9.1.1 Using the graduated receiver measure 100 +/- 0.5 mL of the temperature-adjusted sample. Remove the flask from the apparatus and transfer the fresh specimen directly to the flask, ...
-
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids6. Apparatus6.1 Distillation Apparatus - See Condenser and Cooling Bath section, Figs. 1 and Figs. 2, and Metal Shield or Enclosure for Flask section of Specification E 133.6.1.1 Manual Distillation Apparatus - See Condenser Cooling ...
-
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids4. Summary of Test Method4.1 A 100-mL specimen is distilled under conditions equivalent to a simple batch differential distillation. The temperature of the mercury in the thermometer is equilibrated with that of the refluxing liquid ...
-
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids
ASTM D1078 Test Method for Distillation Range of Volatile Organic Liquids1. Scope1.1 This test method covers the determination of the distillation range of liquids boiling between 30 and 350°C, that are chemically stable during the distillation process, by manual or automatic distillation procedures.1.2 ...
-
ASTM D1545 for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545 for Viscosity of Transparent Liquids by Bubble Time Method5. Report5.1 Report the following information:5.1.1 The viscosity obtained by the timing method expressed as "bubble seconds" or "approximate stokes".NOTE 6 - The time in seconds or "bubble seconds" is an approximate measurement of ...
-
ASTM D1545 for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545 for Viscosity of Transparent Liquids by Bubble Time Method4. Procedure4.1 Fill a standard viscosity tube with the material to be tested to approximately level with the 108-mm line.4.2 Transfer the tube to a constant 25°C temperature bath with the cork loosely inserted. Hold at this temperature ...
-
ASTM D1545 for Viscosity of Transparent Liquids by Bubble Time Method
ASTM D1545 for Viscosity of Transparent Liquids by Bubble Time Method3. Apparatus3.1 Constant-Temperature Bath - Any suitable bath capable of maintaining temperature at 25 +/- 0.1°C with water as the bath medium.3.2 Standard Viscosity Tubes, of clear glass and with flat bottoms, 10.65 +/- 0.025 mm in ...
