-
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter9. Procedure9.1 Weight of Sample - Control the weight of sample (including any auxiliary fuel) so that the temperature rise produced by its combustion will be equal to that of 0.9 to 1.1 g of benzoic acid (Note 2). Weigh ...
-
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter8. Standardization8.1 Determine the Energy Equivalent of the Calorimeter - Average not less than six tests using standard benzoic acid. These tests should be spaced over a period of not less than three days. Use not less ...
-
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter6. Apparatus6.1 Test Room, Bomb, Calorimeter, Jacket, Thermometers, and Accessories, as described in Annex A1.7. Reagents7.1 Benzoic Acid, Standard - Benzoic acid powder must be compressed into a tablet or pellet before weighing. ...
-
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter4. Summary of Test Method4.1 Heat of combustion is determined in this test method by burning a weighed sample in an oxygen bomb calorimeter under controlled conditions. The heat of combustion is computed from temperature ...
-
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
ASTM D240 for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter1. Scope1.1 This test method covers the determination of the heat of combustion of liquid hydrocarbon fuels ranging in volatility from that of light distillates to that of residual fuels.1.2 Under normal conditions, this ...
-
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and P
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)14. Report14.1 Report the following information:14.1.1 A reference to this test method,14.1.2 The sample identification,14.1.3 The date of the test,14.1.4 ...
-
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and P
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)12. Procedure12.1 Analyze the blends (9.2.3) according to the following test sequence.12.1.1 Two coarse determinations using Blends A1 and B1.12.1.1.1 ...
-
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and P
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)10. Preparation of Apparatus10.1 Prepare the instrument for operation in accordance with the manufacturer's instructions.10.2 Inspect the optical probe's ...
-
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and P
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)7. Apparatus7.1 Integrated Automated Analytical MeasurementSystem - This test method uses an integrated automated analytical measurement system comprised ...
-
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and P
ASTM D7060 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)4. Summary of Test Method4.1 Six portions of the sample are diluted in various ratios with 1-methylnaphthalene. Each solution is inserted into the automatic ...
