-
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricantsgas, n - a fluid (such as air) that has neither independent shape nor volume but tends to expand indefinitely.gas, n - substance (matter) in a gaseous state (see gaseous).gaseous, adj - describing a state of matter that shows ...
-
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricantsfacultative anaerobe, n - a microorganism capable of growing in both oxic and anoxic environments.DISCUSSION - Facultative anaerobes use oxygen when it is present, and use either organic or inorganic energy sources (nitrate, ...
-
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricantsecotoxicity, n - the propensity of a material to produce adverse behavioral, biochemical, or physiological effects in non-human organisms or populations.effect load XX (ELXX), n - a statistically or graphically estimated ...
-
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricantsdebris, n - in internal combustion engines, solid contaminant materials unintentionally introduced into the engine or resulting from wear.DISCUSSION - Examples include such things as gasket material, silicone sealer, towel ...
-
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricantscalcined coke, n - petroleum coke that has been thermally treated to drive off the volatile matter and to develop crystalline structure.calcined petroleum coke, n - petroleum coke that has been thermally treated to drive ...
-
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and LubricantsB6 to B20, n - fuel blend consisting of 6 to 20 volume percent biodiesel conforming to the requirements of Specification D6751 with the remainder being a light middle or middle distillate grade diesel fuel and meeting the ...
-
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
ASTM D4175 Terminology Relating to Petroleum, Petroleum Products, and Lubricants1. Scope1.1 This terminology standard covers the compilation of terminology developed by Committee D02 on Petroleum Products and Lubricants, except that it does not include terms/definitions specific only to the standards ...
-
ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester13. Calculation13.1 Method A - No further calculations are required as the effects of barometric pressure were corrected for in Eq 1-3 in 11.1.13.1.1 If the effects of barometric pressure were not corrected before the flash/no flash ...
-
ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup TesterMETHOD B - FLASH POINT DETERMINATION12. Procedure12.1 This procedure repeats the procedures of Method A (11.3 through 11.8) a number of times. Each test uses a fresh test specimen and a different temperature. The change of temperature ...
-
ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup TesterMETHOD A - FLASH/NO FLASH TEST11. Procedure11.1 For specification purposes carry out a flash/no flash test at a temperature (actual) that allows for a correction due to the ambient atmospheric pressure at the time of the test. Use ...
