Model: GC2010D Transformer Oil Dissolved Gas Analyzer
Transformer uses oil as coolant and insulator. Gases are formed within the transformer oil due to natural aging, faults from oxidation, vaporization, oil breakdown, electrolytic action or insulation decomposition. Because the transformer oil bathes each internal component, dissolved gases in the transformer oil contain lots of diagnostic information. Meanwhile, the transformer is very expensive to be replaced, so monitoring these gases is very important to know the current quality of transformer or when the transformer should be removed from service before failure. Presence of each gas compound and its concentration indicates possible failure of transformer.
GC2010D measures composition and concentration of dissolved gases in transformer oil. Performs dissolved gas analysis (DGA) on transformer oil.
Conforms to ASTM D3612, IEC 60567. CE Mark.
Gas compositions in transformer oil analyzed
Standard analysis: hydrogen(H2), oxygen(O2), carbon monoxide(CO), carbon dioxide(CO2), methane(CH4), ethane(C2H6), ethylene(C2H4), acetylene(C2H2), total combustible gas
Extended analysis: hydrogen(H2), oxygen(O2), nitrogen(N2), carbon monoxide(CO), carbon dioxide(CO2), methane(CH4), ethane(C2H6), ethylene(C2H4), acetylene(C2H2), total combustible gas
• Large LCD
• High and stable detection sensitivity
• User-friendly interface to facilitate operation
• Each gas type and its concentration calculated and displayed
• Total Dissolved Combustible Gas (TDCG) calculated and displayed
• Gas PPM level presence
• High reliability, repeatability and reproducibility
If you would like to discuss your requirements for this product further, please email us at firstname.lastname@example.org or use our enquiry form.
Transformer Oil Test Equipment Most Commonly Used
Transformer oil breakdown voltage tester
Oil dissipation factor tester(Tan Delta test)