-
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine10. Calibration10.1 Laboratory and Engine Test Stand Calibration - To maintain testing laboratory and engine test stand calibration status for Sequence IIIF engine oil testing, follow the ...
-
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine9. Preparation of Apparatus9.1 Condenser Cleaning - Immediately after completing a Sequence IIIF test, remove the stainless steel condenser assembly, disassemble it, and soak it in parts ...
-
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine6. Apparatus6.1 Laboratory - Observe the following laboratory conditions to ensure good control of test operations and good repeatability:6.1.1 Maintain the ambient laboratory atmosphere ...
-
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine4. Summary of Test Method4.1 A 3800 Series II V-6 test engine block, with a displacement of 3.8 L, is solvent-cleaned, measured, and rebuilt using new parts installed as specified in this ...
-
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the
ASTM D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine1. Scope1.1 This test method covers an engine test procedure for evaluating automotive engine oils for certain high-temperature performance characteristics, including oil thickening, varnish ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine12. Report12.1 Reporting Reference Oil Test Results - For reference oil tests, the standardized report form set and data dictionary for reporting test results and for summarizing operational ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine11. Laboratory and Engine Test Stand Calibration/Non-Reference Oil Test Requirements11.1 Calibration Frequency:11.1.1 To maintain test consistency and severity levels, calibrate the engine ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine10. Inspection of Engine, Fuel, and Oil10.1 Pre-Test Measurements:10.1.1 Pistons:10.1.1.1 No piston measurements are required.10.1.2 Cylinder Sleeves Inside Diameter Surface Finish - Measure ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine9. Procedure9.1 Pretest Procedure:9.1.1 Initial Oil Fill for Pretest Break-In:9.1.1.1 The initial oil fill is 32.7 kg [72.0 lb] of test oil: 16.4 kg [36.0 lb] for the pan, 3.3 kg [7.2 lb] ...
-
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exh
ASTM D6987 Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine8. Preparation of Apparatus at Rebuild8.1 Cleaning of Parts:8.1.1 Engine Block - Thoroughly spray the engine with solvent (see 7.4) to remove any oil remaining from the previous test and ...